General

Tester: Elizaveta Mokshantseva
Date/Time: 18.07.2025 9:00
Duration: 2:00
Commit/Tag: d8f3434687925bd89abbad0c4864f61cda5d9cc9
Setup: master.permaplant.net
Planned tests: 84
Executed tests: 84
✔️Passed tests: 77
⚠️Problematic tests: 1
❌Failed tests: 5

Error Analysis

Identifying the error: Is it indeed a genuine software defect, or is it a faulty test case, incorrect test execution, etc.?
Has the error already been identified in previous tests?
Error specification

Class 5: Minor deviation

Priority

Level 2: Fix in next version
Level 3: Correction will be done opportunistically

Closing remarks

How is the current state of the software? Heatmap isn't working correctly, other then that it's alright.
Have the quality objectives been achieved? For some test I needed to read them twice to understand what I needed to do.
What are the consequences drawn from the current state, including: how can future errors be avoided, how can the development process be improved? Check if it doesn't do the opposite of the testcase.

Area of Plantings

Add Planting Area

Description: Add a new area of Planting to the map.
Given I am on the map page with the plant layer active
When I select a plant to add to the map
When I click and drag an area on the map
Then I can see information about the sizes in a tooltip hovering next to the area of plantings
Then I can see that a new planting area has been added
When I select the new area of plantings
Then I can see in the plant attributes that there is an area of plantings
Then I can see that the values for Individual Plant Size, Plants per Row, Number of Rows, Total Plants, Length, and Width in "Area of Plantings" are equal to the information shown in the tooltip
Actual Result: ✔️
Test Result: ✔️
Notes:

Move Planting Area

Description: Move a Planting area around the map.
Given I am on the map page with the plant layer active
When I drag a planting area
When I drop the planting area
Then I can see that the planting area was moved
When I select the Planting area
Then I can see in the plant area attributes that modified at and modified by are correctly set
Actual Result: ✔️
Test Result: ✔️
Notes:

Change Size Planting Area - Drag & Drop

Description: Edit an existing Planting Area on the map.
Given I am on the map page with the plant layer active
When I select a plant area that is already planted
When I select a corner/edge and drag it around
Then I can see information about the new sizes as a tooltip hovering next to the area of plantings
When I stop holding the mousebutton down
Then I can see that the planting area size has changed
Then I can see in the plant area attributes that modified at and modified by are correctly set
Actual Result: ✔️
Test Result: ✔️
Notes:

Change Size Planting Area - Change Values

Description: Edit an existing Planting Area on the map.
Given I am on the map page with the plant layer active
When I select a plant area that is already planted
Then I can see detailed Information about this plant area in the left toolbox
When I edit the Length or Width
Then I can see that the planting area size has changed
Then I can see in the plant area attributes that modified at and modified by are correctly set
Actual Result: ✔️
Test Result: ✔️
Notes:

Base Layer

Move map border point

Description: Move map border point.
Given I am on the map page with the base layer active
When I click on the 'Pointer' button
Then I can see that the 'Pointer' button is shown as active
Then I can see that a hint is shown at the bottom center of the map
When I drag a map border point
Then I can see that the map border point was moved
When I click on the 'Pointer' button again
Then I can see that the 'Pointer' button is shown as inactive
Then I can see that the hint at the bottom center of the map is not shown anymore
When I drag a map border point
Then I can see that the map border point was not moved
Actual Result: ✔️
Test Result: ✔️
Notes: Shift + M can be used instead of clicking the 'Pointer' button Escape can be used instead of clicking the 'Pointer' button again

Add map border point

Description: Add map border point.
Given I am on the map page with the base layer active
When I click on the 'Pencil Plus' button
Then I can see that the 'Pencil Plus' button is shown as active
Then I can see that a hint is shown at the bottom center of the map
When I click on the map border
Then I can see that a new map border point was added
When I click on the 'Pencil Plus' button again
Then I can see that the 'Pencil Plus' button is shown as inactive
Then I can see that the hint at the bottom center of the map is not shown anymore
When I click on the map border
Then I can see that no new map border point was added
Actual Result: ✔️
Test Result: ✔️
Notes: Shift + A can be used instead of clicking the 'Pencil Plus' button Escape can be used instead of clicking the 'Pencil Plus' button again

Remove map border point

Description: Remove map border point.
Given I am on the map page with the base layer active
When I click on the 'Eraser' button
Then I can see that the 'Eraser' button is shown as active
Then I can see that a hint is shown at the bottom center of the map
When I click on a map border point
Then I can see that the map border point was removed
When I click on the 'Eraser' button again
Then I can see that the 'Eraser' button is shown as inactive
Then I can see that the hint at the bottom center of the map is not shown anymore
When I click on a map border point
Then I can see that the map border point was not removed
Actual Result: ✔️
Test Result: ✔️
Notes: Shift + D can be used instead of clicking the 'Eraser' button Escape can be used instead of clicking the 'Eraser' button again

Add Background Image

Description: Check whether the maps background image is displayed.
Given I am on a map page with the base layer active
When I select a base layer image
Then I can see the base layer image on the canvas
~~Actual Result: "Failed to fetch directory content. Please try again later." and "Sorry! I couldn't load the image. Please try again later."~~
Actual Result: ✔️
Test Result: ✔️
Notes: Redid test with testuser instead own

Move Background Image

Description: Check whether the maps background image is displayed correctly after moving.
Given I am on a map page with the base layer active
When I select a base layer image
When I increase the base layers x position in steps of
Then I can see the base layer image is moved to the right
When I decrease the base layers x position in steps of negative (-)
Then I can see the base layer image is moved to the left
When I increase the base layers y position in steps of
Then I can see the base layer image is moved up
When I decrease the base layers y position in steps of negative (-)
Then I can see the base layer image is moved down
Actual Result: When y position is increased it moves down, if decreased it moves up.
Test Result: ⚠️
Notes:

Examples: | step | | 1 | | 1.1 | | 1.11 | | 2.5 | | 5 | | 5.55 |

Autoscaling

Description: Check whether the maps background image is scaled according to distance entered.
Given I am on a map page with the base layer active
When I click on the autoscaling button
Then I am prompted to select two points with a known distance
When I click anywhere on the map inside the map bounds
Then a red dot indicating the selected position appears
When I select the end of the known distance
Then a second red dot indicating the second selected position appears and additionally a line connecting the dots appears
Then a window asking me to enter the selected real-life distance in meters and centimeters appears
When I enter the value(s) for the distance and click the ok button
Then the background image is correctly re-scaled to the distance shown in the grid
Actual Result: ✔️
Test Result: ✔️
Notes: Use /Photos/Birdie.jpg for testing. All test users should have access to it.

Drawing Layer

Switch between drawing layers

Description: Switch between drawing layers
Given I am on the map page with a drawing layer active
Given I can select another drawing layer
When I click on a rectangle of the current layer
Then I can see that the rectangle is selected
When I switch to another drawing layer
When I click on a rectangle of the previous layer
Then I can see that the rectangle is not selected
When I click on a rectangle of the current layer
Then I can see that the rectangle is selected
Actual Result: ✔️
Test Result: ✔️
Testing Note: would add "Given that a rectangle is on the map"
Notes: Can be repeated for all types of drawings

Diagonally resize shape

Description: Diagonally resize shape.
Given I am on the map page with the drawing layer active and a shape selected
When I drag a corner
Then I can see that the new shape size has a different ratio of length to width as before
Actual Result: ✔️
Test Result: ✔️
Notes: Repeat this test for all Shape types

Entry and List Seeds

Seed creation

Description: Adding more entries to the inventory overview.
Given I am logged in and have already added entries
When I submit the form for seed creation
Then I see my newly added entry in the overview
Actual Result: ✔️
Test Result: ✔️
Notes:

Seed creation with more than 30 objects

Description: After creating 30 seeds, everything should be shown correctly on the overview page.
Given I am logged in and add 30 valid seeds
When I go to my inventory
Then I see all my newly added seeds in the overview
Actual Result: ✔️
Test Result: ✔️
Notes:

Edit seed name

Description: After renaming a seed, the new name should be visible in the seed overview.
Given I am logged in and edit a seed name
When I go to my inventory
Then I see the new name of the edited seed
Actual Result: ✔️
Test Result: ✔️
Notes:

Archive seed

Description: After archiving a seed, it should be removed from the overview or marked as archived
Given I am logged in and archive a seed
When I go to my inventory
Then I don't see the archived seed anymore, or it is marked as archived
Actual Result: ✔️
Test Result: ✔️
Notes:

Restore an archived seed

Description: After restoring an archived seed, it should be added to the overview again
Given I am logged in and visited the inventory page
When I archive a seed and then restore it
Then I see the restored seed again.
Actual Result: ✔️
Test Result: ✔️
Notes:

Additional name on map: plant labels

Description: Test additional names being displayed properly.
Given I am on the map page with the plants layer active
When I create a new plant from the inventory
Then I can see the additional name on the label when hovering over the plant
Actual Result: ✔️
Test Result: ✔️
Notes: The additional name must also be visible when a different account views the same map in parallel.

Description: Test additional names being displayed properly.
Given I am on the map page with the plants layer active
When I create a new plant from the inventory
When I click on the new plant icon.
Then I can see the additional name in the left toolbars heading
Actual Result: ✔️
Test Result: ✔️
Notes: The additional name must also be visible when a different account views the same map in parallel.

Additional name on map: updates

Description: Test additional names being displayed properly.
Given I am on the map page with the plants layer active
When I create a new plant from the inventory
When I go to the inventory page and change the seeds name
Then I can see the changes in the plant label and left toolbar
Actual Result: ✔️
Test Result: ✔️
Notes: The additional name must also be visible when a different account views the same map.

Grid

Grid is Changed on Zoom

Description: Display a point grid on the screen.
Given I am on a map page
When I Zoom in or out
Then the grid spacing is changing
Actual Result: ✔️
Test Result: ✔️
Notes:

Guided Tour

Map Editor Guided Tour

Description: Check whether the Guided Tour leaves the Map Editor in its original state.
Given I am on a map page
When I do the Guided Tour
Then after I have done the Guided Tour the map is the same as before
Actual Result: Can't test in master.permaplant, as it's to late in the testing line
Test Result: ?
Notes: Check if all actions can be done as described.

Heatmap

Plant layer should be above heatmap

Description: Verify that the Plant Layer is above the Heatmap Layer
Given I am on a map page
When I place some tomatoes on the map
When I select a potato and try to place it near the tomatoes so that heatmap is shown
Then I can see that the heatmap is below the plants
Actual Result: ✔️
Test Result: ✔️
Notes:

Change position of plant layer

Description: Verify that the heatmap changes its position when the plant layer is moved in priority
Given I am on a map page where plant layer is above an drawing layer
When I place some tomatoes on the plant layer
When I draw a filled rectangle on the drawing layer so that it overlaps with the tomatoes
When I select a potato and try to place it near the tomatoes so that heatmap is shown
Then I can see that the heatmap is below the plants and above the rectangle
When I move the plant layer below the drawing layer
Then I can see that the heatmap is below the rectangle and below the plants
Actual Result: ✔️
Test Result: ✔️
Notes:

All Shade types and Allium ursinum

Description: Verify heatmap colors for all three shade types for the plant named Wild garlic (Allium ursinum)
Given I am on a map where three shades are drawn with one being a light shade, one being a partial shade and one being a permanent shade
When I select the plant with the name "Allium ursinum" for planting in the plant layer
Then I can see that the heatmap shows green areas for all three shades
Actual Result: ✔️
Test Result: ✔️
Notes:

All Shade types and Allium pendulinum

Description: Verify heatmap colors for all three shade types for the plant named Allium pendulinum (Allium pendulinum)
Given I am on a map where three shades are drawn with one being a light shade, one being a partial shade and one being a permanent shade
When I select the plant with the name "Allium pendulinum" for planting in the plant layer
Then I can see that the heatmap shows two green areas for light and partial shades and red for the permanent shade
Actual Result: ✔️
Test Result: ✔️
Notes:

All Shade types and Malus domestica

Description: Verify heatmap colors for all three shade types for the plant named Apple (Malus domestica)
Given I am on a map where three shades are drawn with one being a light shade, one being a partial shade and one being a permanent shade
When I select the plant with the name "Malus domestica" for planting in the plant layer
Then I can see that the heatmap shows one green area for the light shade, orange for the partial shade and red for the permanent shade
Actual Result: ✔️
Test Result: ✔️
Notes:

All Shade types and Tomato

Description: Verify heatmap colors for all three shade types for the plant named Tomato
Given I am on a map where three shades are drawn with one being a light shade, one being a partial shade and one being a permanent shade
When I select the plant with the name "Tomato" for planting in the plant layer
Then I can see that the heatmap shows red areas for all three shades
Actual Result: ✔️
Test Result:✔️
Notes:

Negative temporal relation within min duration

Description: Verify heatmap colors for temporal relation between two plantings of "Allium cepa"
Given I am on a map where a planting of "Allium cepa" has existed 6 months ago (remove_date = current date - 6 Months)
When I select the plant with the name "Allium cepa" for planting in the plant layer
Then I can see that the heatmap shows a red indication on the spot the previous planting of "Allium cepa" has been
Actual Result: Set removal date of a "Allium cepa" to 18.03.2025 go to 18.09.2025. Select "Allium cepa". The area is green where the previous "Allium cepa" was.
Test Result: ❌
Notes:

Negative temporal relation exactly at min duration

Description: Verify heatmap colors for temporal relation between two plantings of "Allium cepa"
Given I am on a map where a planting of "Allium cepa" has existed 1 year ago (remove_date = current date - 1 year)
When I select the plant with the name "Allium cepa" for planting in the plant layer
Then I can see that the heatmap shows an orange indication on the spot the previous planting of "Allium cepa" has been
Actual Result: Set removal date of a "Allium cepa" to 18.09.2024 go to 18.09.2025. Select "Allium cepa". The area is green where the previous "Allium cepa" was.
Test Result: ❌
Notes:

Negative temporal relation between min and max duration

Description: Verify heatmap colors for temporal relation between two plantings of "Allium cepa"
Given I am on a map where a planting of "Allium cepa" has existed 2 years ago (remove_date = current date - 2 years)
When I select the plant with the name "Allium cepa" for planting in the plant layer
Then I can see that the heatmap shows an orange indication on the spot the previous planting of "Allium cepa" has been
Actual Result: Set removal date of a "Allium cepa" to 18.09.2023 go to 18.09.2025. Select "Allium cepa". The area is green where the previous "Allium cepa" was.
Test Result: ❌
Notes:

Negative temporal relation within min duration

Description: Verify heatmap colors for temporal relation between "Allium fistulosum" and "Allium cepa"
Given I am on a map where a planting of "Allium fistulosum" has existed 5 months ago (remove_date = current date - 5 months)
When I select the plant with the name "Allium cepa" for planting in the plant layer
Then I can see that the heatmap shows a red indication on the spot the previous planting of "Allium fistulosum" has been
Actual Result: Set removal date of a "Allium fistulosum" to 18.04.2023 go to 18.09.2025. Select "Allium cepa". The area isn't marked anything.
Test Result: ❌
Notes:

Positive temporal relation within min duration

Description: Verify heatmap colors for temporal relation between plantings of "Allium sativum" and "Lactuca sativa"
Given I am on a map where a planting of "Allium sativum" has existed 6 months ago (remove_date = current date - 6 months)
When I select the plant with the name "Lactuca sativa" for planting in the plant layer
Then I can see that the heatmap shows a green indication on the spot the previous planting of "Allium sativum" has been
Actual Result: Set removal date of a "Allium sativum" to 18.04.2023 go to 18.09.2025. Select "Lactuca sativa". The area isn't marked anything.
Test Result: ❌
Notes:

Hydrology wet area and Great Water Dock

Description: Verify heatmap color for hydrology type wet for the plant named Great Water Dock (Rumex hydrolapathum)
Given I am on a map where a hydrology area is drawn with the type wet
When I select the plant with the name "Rumex hydrolapathum" for planting in the plant layer
Then I can see that the heatmap shows a green area for the hydrology area
Actual Result: ✔️
Test Result: ✔️
Notes:

Hydrology wet area and Tomato

Description: Verify heatmap color for hydrology type wet for the plant named Tomato (Solanum lycopersicum)
Given I am on a map where a hydrology area is drawn with the type wet
When I select the plant with the name "Solanum lycopersicum" for planting in the plant layer
Then I can see that the heatmap shows a red area for the hydrology area
Actual Result:✔️
Test Result: ✔️
Notes: The soil has to contain enough nutrients and be watered properly.

Soil texture sandy area and Tomato

Description: Verify heatmap color for soil texture type sandy for the plant named Tomato (Solanum lycopersicum)
Given I am on a map where a soil texture area is drawn with the type sandy
When I select the plant with the name "Solanum lycopersicum" for planting in the plant layer
Then I can see that the heatmap shows a green area for the soil texture area
Actual Result: ✔️
Test Result: ✔️
Notes:

Soil texture clay area and Watermelon

Description: Verify heatmap color for soil texture type clay for the plant named Watermelon (Citrullus lanatus)
Given I am on a map where a soil texture area is drawn with the type clay
When I select the plant with the name "Citrullus lanatus" for planting in the plant layer
Then I can see that the heatmap shows a red area for the soil texture area
Actual Result: ✔️
Test Result: ✔️
Notes:

Soil texture clay area and Cauliflower

Description: Verify heatmap color for soil texture type clay for the plant named Cauliflower (Brassica oleracea botrytis)
Given I am on a map where a soil texture area is drawn with the type clay
When I select the plant with the name "Brassica oleracea botrytis" for planting in the plant layer
Then I can see that the heatmap shows a green area for the soil texture area
Actual Result: ✔️
Test Result: ✔️
Notes:

Occupied space with plants in the future

Description: Verify that the heatmap indicates an occupied space with black
Given I am on a map where any plant and an area of plants is planted
When I go into the past one day before these exist and select any plant for planting in the plant layer
Then I can see that the heatmap shows a black area on the spot these plants will be in the future
Actual Result: ✔️
Test Result: ✔️
Notes:

Inventory

Change Language While Creating a Seed

Description: Change language while creating a seed
Given I have selected the English language
Given I am on the seed entry page
When I select a plant
When I change the language to German
Then the plant name is translated to German
Actual Result:✔️
Test Result: ✔️
Notes: Should also work when switching from German to English

Layer Visibility

Layer Opacity

Description: Check whether the opacity of a layer changes.
Given I am on a map page with a base layer image configured
When dragging the slider for the base layer in the layer section of the toolbar to 50%
Then I can see the change in opacity of the base layer image
When I change the size of the toolbar
Then I can see the slider and the filling change in size proportionally. Therefore 50% of the slider should be filled
Actual Result: ✔️
Test Result: ✔️
Notes:

Layer Management

Initial Order of Layers

Description: Test initial order of layers.
When I create a new map
Then Base Layer is at bottom of layer list and Plant Layer is on top of layer list
Actual Result: ✔️
Test Result: ✔️
Notes:

Correct konva rendering of layer order on new map

Description: Test correct rendering order of konva layers.
Given I am on a new map
When I add a background image in Base Layer
When I add an overlapping rectangle in Drawing Layer
When I add an overlapping plant in plant layer
Then Plant in is front of rectangle and rectangle is in front of background image
Actual Result: ✔️
Test Result: ✔️
Notes:

Renaming of layer

Description: Test if Drawing Layer can be renamed.
Given I am on a new map
When I rename the Drawing Layer
Then The new name is visible in the layer list
Actual Result: ✔️
Test Result: ✔️
Notes:

Creation of new layer

Description: Test if new layer can be created.
Given I am on a new map
When I select a layer and create a new one
Then The new layer is visible above currently selected layer
Actual Result: ✔️
Test Result: ✔️
Notes:

Change order of layers

Description: Test if the order of layers can be updated correctly.
Given I am on a map with 2 drawing layers with overlapping rectangles
When I select the upper Drawing Layer and move it below the other one
Then The order in the layer list is updated and the rectangle of the new upper drawing layer is shown in front of the lower one on the map
Actual Result: ✔️
Test Result: ✔️
Notes:

Delete Drawing Layer

Description: Test if Drawing Layer can be deleted.
Given I am on a map with some drawing on a Drawing Layer
When I delete the Drawing Layer
Then The layer disappears from layer list and drawings are deleted from map
Actual Result: ✔️
Test Result: ✔️
Notes:

Deletion of Plant Layer not possible

Description: Test if deletion of Plant layer is disabled.
Given I am on a new map
When I select the Plant Layer
Then Button to delete layer is disabled
Actual Result: ✔️
Test Result: ✔️
Notes:

Deletion of Base Layer not possible

Description: Test if Deletion of Base layer is disabled.
Given I am on a new map
When I select the Base Layer
Then Button to delete layer is disabled
Actual Result: ✔️
Test Result: ✔️
Notes: The additional name must also be visible when a different account views the same map.

Top layer cannot be moved up

Description: Test if the top layer cannot be moved up.
Given I am on a new map
When I select the top layer
Then Button to to move layer up is disabled
Actual Result: ✔️
Test Result: ✔️
Notes:

Bottom layer cannot be moved down

Description: Test if the bottom layer cannot be moved down.
Given I am on a new map
When I select the bottom layer
Then Button to to move layer down is disabled
Actual Result: ✔️
Test Result: ✔️
Notes:

Renaming of Plant Layer not possible

Description: Test if Renaming of Plant layer is not possible.
Given I am on a new map
When I select the Plant Layer
Then Button to rename layer is disabled
Actual Result: ✔️
Test Result: ✔️
Notes:

Renaming of Base Layer not possible

Description: Test if Renaming of Base layer is not possible.
Given I am on a new map
When I select the Base Layer
Then Button to rename layer is disabled
Actual Result: ✔️
Test Result: ✔️
Notes:

Description: Verify that a user can log in with valid credentials.
Given I am on the landing page
When I click on the "Log In" Button
When I enter valid username and password
Then I am redirected to the landing page
And there is "logout" Button now
Actual Result: ✔️
Test Result: ✔️
Notes:

Logout

Description: Verify that a logged-in user can log out successfully.
Given I am logged in and on the landing page
When I click the logout button
Then I am redirected to the landing page
Actual Result: ✔️
Test Result: ✔️
Notes:

Description: Verify that login fails with incorrect credentials.
Given I am on the landing page
When I click on the "Log In" Button
When I enter an invalid username or password
Then I see an error message indicating login failed
Actual Result: ✔️
Test Result: ✔️
Notes:

Map Deletion

Description: A map should no longer be available after it has been deleted.
Given I am on a map overview page
When I delete a map
Then the map is no longer available in the overview
Actual Result: ✔️
Test Result: ✔️
Notes:

Map Search

Description: Appropriate maps should be displayed for each search term.
Given I am on a map overview page
When I search for a map using the search field
Then the maps are filtered appropriately
Actual Result: ✔️
Test Result: ✔️
Notes:

Map Overview: More than 30 Layers should be visible

Description: Test that pagination works on the map overview screen.
Given I am on the map overview screen
When I create more than 30 maps
Then I can see all maps after scrolling to the bottom of the page
Actual Result: ✔️
Test Result: ✔️
Notes:

Map Undo Redo

Undo Redo Planting

Description: Undo and Redo a Planting to the map.
Given I am on the map page with the plant layer active
When I select a plant and place it onto the map
When I click Undo in the Left Toolbar
Then I can no longer see the plant
When I click Redo in the Left Toolbar
Then I can see the plant again I planted
Actual Result: ✔️
Test Result: ✔️
Notes:

Undo Redo Planting with Keybinding

Description: Undo and Redo a Planting to the map.
Given I am on the map page with the plant layer active
When I select a plant and place it onto the map
When I press STRG+Z
Then I can no longer see the plant
When I click STRG+Y
Then I can see the plant again I planted
Actual Result: ✔️
Test Result: ✔️
Notes:

Measuring Distances

Measure a distance

Description: Test whether distance can be measured successfully.
Given I am on a map page
When I click on the measurement button
When I measure a distance
Then I see a measurement line
Then I see the measured distance
Actual Result: ✔️
Test Result: ✔️
Notes:

Measurement: Cancel measurement without deleting measurements

Description: Verify that measured distances don't disappear when the measurement mode is canceled using the button in the status panel.
Given I am on a map page
When I click on the measurement button
When I measure a distance
When I cancel the measurement mode using the status panel
Then the measurement layer is no longer active
Then I can still see the measured distance
Actual Result: ✔️
Test Result: ✔️
Notes:

Measurement: Cancel measurement and delete all measurement lines

Description: Verify that measured distances disappear when the measurement mode is canceled using the measurement button.
Given I am on a map page
When I click on the measurement button
When I measure a distance
When I cancel the measurement mode using the measurement button in the toolbar
Then I can no longer see the measured distance
Actual Result: ✔️
Test Result: ✔️
Notes:

Measurement: Delete measurements after measurement mode is deactivated

Description: Verify that measured distances don't disappear when the measurement mode is canceled using the button in the status panel.
Given I am on a map page
When I click on the measurement button
When I measure a distance
When I cancel the measurement mode using the status panel
When I click on the measurement button
Then I can no longer see the measured distance
Actual Result: ✔️
Test Result: ✔️
Notes:

Plant Layer

Add Planting

Description: Add a new Planting to the map.
Given I am on the map page with the plant layer active
When I select a plant to add to the map
Then I can see how many of the same plants are already present on the map, at the current date, in the status panel
Then the same plants already present on the map, at the current date, are highlighted with an equality marker
When I click on the map
Then I can see that a new Planting was added
When I select the new Planting
Then I can see in the plant attributes that created at, created by, modified at and modified by are correctly set
Actual Result: ✔️
Test Result: ✔️
Notes: Can be repeated with different plants. Can be repeated in another tab/by another user.

Move Planting

Description: Move a Planting around the map.
Given I am on the map page with the plant layer active
When I drag a planting
When I drop the planting
Then I can see that the planting was moved
When I select the new Planting
Then I can see in the plant attributes that modified at and modified by are correctly set
Actual Result: ✔️
Test Result: ✔️
Notes: Can be repeated with different plants. Can be repeated in another tab/by another user.

Edit Planting

Description: Edit an existing Planting on the map.
Given I am on the map page with the plant layer active
When I select a plant that is already planted
Then I can see detailed Information about this plant in the left toolbox
When I edit the Notes (or any other field)
Then I can see in the plant attributes that i changed are correctly changed
Actual Result: ✔️
Test Result: ✔️
Notes: Also after reloading the site

Remove Planting

Description: Remove a existing Planting on the map.
Given I am on the map page with the plant layer active
When I select a plant that is already planted
Then I can see detailed Information about this plant in the left toolbox
When I edit the "Removed on" date to a date in the past
Then I can no longer see the plant
Actual Result: ✔️
Test Result: ✔️
Notes:

Delete Planting

Description: Deleting a existing Planting on the map.
Given I am on the map page with the plant layer active
When I select a plant that is already planted
Then I can see detailed Information about this plant in the left toolbox
When I click the "Delete planting" Button
Then I can no longer see the plant
Actual Result: ✔️
Test Result: ✔️
Notes:

Diagonally resize single planting

Description: Diagonally resize single planting.
Given I am on the map page with the plant layer active and a single planting selected
When I drag a corner
Then I can see that the new plant size has the same ratio of length to width as before
Actual Result: ✔️
Test Result: ✔️

Diagonally resize area of planting

Description: Diagonally resize area of planting.
Given I am on the map page with the plant layer active and an area of plantings selected
When I drag a corner
Then I can see that the new area of planting size has a different ratio of length to width as before
Actual Result: ✔️
Test Result: ✔️

Read Only

Go Offline

Description: Put Browser Offline
Given I am on a map
When I put the browser to the offline mode (Firefox: Alt, Datei -> Offline Arbeiten)
Then I see the message "You are offline. The read-only mode was activated." and everything but measurement is read-only (see other test cases)
Actual Result: ✔️
Test Result: ✔️
Notes:

Search Plants

Plant Search

Description: Show a selection of plants if the search input is empty.
Given I am on a map page with the plant layer active
When I click on the magnifying glass icon next to the plant's title
When I have an empty search box
Then I can see various plants as results
Actual Result: ✔️
Test Result: ✔️
Notes:

Shade Layer

Add Shading

Description: Add a new Shading to the map.
Given I am on the map page with the shade layer active
When I click on the 'Light' button
When I draw on the map
Then I can see that a new shading was added
Actual Result: ✔️
Test Result: ✔️
Notes: Repeat this test for all Shading types

Remove Shading

Description: Remove a Shading from the map.
Given I am on the map page with the shade layer active and a Shading is selected
When I click on 'Delete shading' in the left toolbar
Then I can see that a new shading was deleted
Actual Result: ✔️
Test Result: ✔️

Edit Shade Type

Description: Change the shade of a shading.
Given I am on the map page with the shade layer active and a Shading is selected
When I select different shade from the drop-down menu in the left toolbar
Then I can see that the shade is changed successfully
Actual Result: ✔️
Test Result: ✔️
Notes: select each shading type at least once

Set Creation Date in the Future

Description: Update the date from which the shading should be active
Given I am on the map page with the shade layer active and a Shading is selected
When I select the current date in the timeline
When I select a creation date in the future
Then I can see that the shading is no longer shown on the map
Actual Result: ✔️
Test Result: ✔️

Set Removal Date in the Future

Description: Update the date from which the shading should be active
Given I am on the map page with the shade layer active and a Shading is selected
When I select the current date in the timeline
When I select a creation date in the past
When I select a removal date in the future
Then I can see that the shading is shown on the map
Actual Result: ✔️
Test Result: ✔️

Set Removal date in the Past

Description: Update the date until which the shading should be active
Given I am on the map page with the shade layer active and a Shading is selected
When I select the current date in the timeline
When I select a creation date in the past
When I select a removal date in the past after the creation date
Then I can see that the shading is no longer shown on the map
Actual Result: ✔️
Test Result: ✔️

Translation

Default Translations English

Description: Verify default translation strings.
Given I am in a map and the current language is English
When I activate the plant labels and add a plant
Then all strings are in English
Actual Result: ✔️
Test Result: ✔️
Notes:

Default Translations German

Description: Verify default translation strings.
Given I am in a map and the current language is German
When I activate the plant labels and add a plant
Then all strings are in German
Actual Result: ✔️
Test Result: ✔️
Notes:

Change Translation in Maps

Description: Verify that a user can switch language in a map and stays in the map.
Given I am in a map and the current language is English
When I click on the "en" Drop Down
When I click "Deutsch"
Then I am still on the same map
And all the text is in German now
Actual Result: ✔️
Test Result: ✔️
Notes:

Change Translation on Landingpage

Description: Verify that a user can switch language on the landing page.
Given I am on the landing page and the current language is English
When I click on the "en" Drop Down
When I click "Deutsch"
Then I am still on the Landing Page
And all the text is in German now
Actual Result: ✔️
Test Result: ✔️
Notes:

PermaplanT