Tester: Filip, Stefanie
Date/Time: 01.08.24
Duration: 30 Minutes
Commit/Tag: 03e97dadad765070e8efcbdb4c9f1dc55479c298
Setup: master.permaplant.net
Planned tests: 27
Executed tests: 26
✔️Passed tests: 26
⚠️Problematic tests: 0
❌Failed tests: 0
How is the current state of the software? Overall in a good state, minor errors and ui issues.Have the quality objectives been achieved? Usability can be improved.What are the consequences drawn from the current state, including: how can future errors be avoided, how can the development process be improved? Usability Tests, Mockups
1. When logging out while in a map, 4 error toast messages get shown on screen.
2. Error has been previously specified.
3. Class 6: Cosmetic issue
4. Level 3: Correction will be done opportunistically
1. When using the measurement tool, it is not clear that the right button stops the measuring.
2. No
3. Class 6: Cosmetic issue
4. Level 3: Correction will be done opportunistically
1. When using the measurement tool, closing the bottom status bar draws a measuring to the X of the status bar.
2. No
3. Class 6: Cosmetic issue
4. Level 3: Correction will be done opportunistically
1. When changing opacity of a layer, the cursor could better indicate that the line is changeable
2. Not yet identified
3. Class 6: Cosmetic issue
4. Level 3: Correction will be done opportunistically
Description: Show a selection of plants if the search input is empty.
Given I am on a map page with the plant layer active
When I have an empty search box
Then I can see wanted plants as results
Actual Result:
Test Result: ✔️
Notes:
Description: Check whether the opacity of a layer changes.
Given I am on a map page with a base layer image configured
When dragging the slider for the base layer in the layer section of the toolbar to 50%
Then I can see the change in opacity of the base layer image
When I change the size of the toolbar
Then I can see the slider and the filling change in size proportionally. Therefore 50% of the slider should be filled.
Actual Result:
Test Result: ✔️
Notes:
Description: Check whether the maps background image is displayed correctly.
Given I am on a map page with the base layer active
When I select a base layer image
Then I can see the base layer image on the canvas
Actual Result:
Test Result: ✔️
Notes:
Description: Display a point grid on the screen.
Given I am on a map page
When I Zoom in or out
Then the grid spacing is changing
Actual Result:
Test Result: ✔️
Notes:
Description: Check whether the Guided Tour leaves the Map Editor in its original state.
Given I am on a map page
When I do the Guided Tour
Then after I have done the Guided Tour the map is the same as before
Actual Result: Description of plant relations says what a red line indicates, but no red line is shown on the map.
Test Result: ✔️
Notes: Check if all actions can be done as described.
Description: Test additional names being displayed properly.
Given I am on the map page with the plants layer active
When I create a new plant from the inventory.
Then I can see the additional name on the label when hovering over the plant.
Actual Result:
Test Result: ✔️
Notes: The additional name must also be visible when a different account views the same map in parallel.
Description: Test additional names being displayed properly.
Given I am on the map page with the plants layer active
When I create a new plant from the inventory.
When I click on the new plant icon.
Then I can see the additional name in the left toolbars heading.
Actual Result:
Test Result: ✔️
Notes: The additional name must also be visible when a different account views the same map in parallel.
Description: Test additional names being displayed properly.
Given I am on the map page with the plants layer active
When I create a new plant from the inventory.
When I go to the inventory page and change the seeds name.
Then I can see the changes in the plant label and left toolbar.
Actual Result:
Test Result: ✔️
Notes: The additional name must also be visible when a different account views the same map.
Description: Test initial order of layers
When I create a new map
Then Base Layer is at bottom of layer list and Plant Layer is on top of layer list
Actual Result:
Test Result: ✔️
Notes:
Description: Test correct rendering order of konva layers.
Given I am on a new map
When I add a background image in Base Layer
When I add an overlapping rectangle in Drawing Layer
When I add an overlapping plant in plant layer
Then Plant in is front of rectangle and rectangle is in front of background image
Actual Result:
Test Result: ✔️
Notes:
Description: Test if Drawing Layer can be renamed.
Given I am on a new map
When I rename the Drawing Layer
Then The new name is visible in the layer list
Actual Result:
Test Result: ✔️
Notes:
Description: Test if new layer can be created.
Given I am on a new map
When I select a layer and create a new one
Then The new layer is visible above currently selected layer
Actual Result:
Test Result: ✔️
Notes:
Description: Test if the order of layers can be updated correctly.
Given I am on a map with 2 drawing layers with overlapping rectangles
When I select the upper Drawing Layer and move it below the other one
Then The order in the layer list is updated and the rectangle of the new upper drawing layer is shown in front of the lower one on the map.
Actual Result:
Test Result: ✔️
Notes:
Description: Test if Drawing Layer can be deleted
Given I am on a map with some drawing on a Drawing Layer.
When I delete the Drawing Layer
Then The layer disappears from layer list and drawings are deleted from map
Actual Result:
Test Result: ✔️
Notes:
Description: Test if deletion of Plant layer is disabled
Given I am on a new map.
When I select the Plant Layer
Then Button to delete layer is disabled
Actual Result:
Test Result: ✔️
Notes:
Description: Test if Deletion of Base layer is disabled
Given I am on a new map.
When I select the Base Layer
Then Button to delete layer is disabled
Actual Result:
Test Result: ✔️
Notes:
Description: Test if deleted layer can be restored
Given I am on a map with some drawing on a drawing layer.
When I delete the drawing layer
Then Layer disappears from layer list and drawings are deleted from map
When I press undo
Then Layer appears again at same position as it was before deletion and drawings are visible again.
Actual Result:
Test Result: ✔️
Notes:
Description: Test if the top layer cannot be moved up
Given I am on a new map.
When I select the top layer.
Then Button to to move layer up is disabled
Actual Result:
Test Result: ✔️
Notes:
Description: Test if the bottom layer cannot be moved down
Given I am on a new map.
When I select the bottom layer.
Then Button to to move layer down is disabled
Actual Result:
Test Result: ✔️
Notes:
Description: Test if Renaming of Plant layer is not possible
Given I am on a new map.
When I select the Plant Layer
Then Button to rename layer is disabled
Actual Result:
Test Result: ✔️
Notes:
Description: Test if Renaming of Base layer is not possible
Given I am on a new map.
When I select the Base Layer
Then Button to rename layer is disabled
Actual Result:
Test Result: ✔️
Notes:
Description: Test whether the heatmap endpoints generates the image correctly.
Given I am on a map page with the plant layer active
When I start planting a plant
Then I see suitable places for that plant
Actual Result:
Test Result:
Notes:
Description: Test that pagination works on the map overview screen
Given I am on the map overview screen
When I create more than 30 maps
Then I can see all maps after scrolling to the bottom of the page.
Actual Result:
Test Result: ✔️
Notes:
Description: Test whether distance can be measured successfully
Given I am on a map page
When I click on the measurement button
When I measure a distance
Then I see a measurement line
Then I see the measured distance
Actual Result:
Test Result: ✔️
Notes:
Description: Verify that measured distances don't disappear when the measurement mode is canceled using the button in the status panel.
Given I am on a map page
When I click on the measurement button
When I measure a distance
When I cancel the measurement mode using the status panel
Then the measurement layer is no longer active
Then I can still see the measured distance
Actual Result:
Test Result: ✔️
Notes:
Description: Verify that measured distances disappear when the measurement mode is canceled using the measurement button.
Given I am on a map page
When I click on the measurement button
When I measure a distance
When I cancel the measurement mode using the measurement button in the toolbar
Then I can no longer see the measured distance
Actual Result:
Test Result: ✔️
Notes:
Description: Verify that measured distances don't disappear when the measurement mode is canceled using the button in the status panel.
Given I am on a map page
When I click on the measurement button
When I measure a distance
When I cancel the measurement mode using the status panel
When I click on the measurement button
Then I can no longer see the measured distance
Actual Result:
Test Result: ✔️
Notes: