Struct tokio_util::codec::Framed

source ·
pub struct Framed<T, U> { /* private fields */ }
Expand description

A unified Stream and Sink interface to an underlying I/O object, using the Encoder and Decoder traits to encode and decode frames.

You can create a Framed instance by using the Decoder::framed adapter, or by using the new function seen below.

Implementations§

source§

impl<T, U> Framed<T, U>where T: AsyncRead + AsyncWrite,

source

pub fn new(inner: T, codec: U) -> Framed<T, U>

Provides a Stream and Sink interface for reading and writing to this I/O object, using Decoder and Encoder to read and write the raw data.

Raw I/O objects work with byte sequences, but higher-level code usually wants to batch these into meaningful chunks, called “frames”. This method layers framing on top of an I/O object, by using the codec traits to handle encoding and decoding of messages frames. Note that the incoming and outgoing frame types may be distinct.

This function returns a single object that is both Stream and Sink; grouping this into a single object is often useful for layering things like gzip or TLS, which require both read and write access to the underlying object.

If you want to work more directly with the streams and sink, consider calling split on the Framed returned by this method, which will break them into separate objects, allowing them to interact more easily.

Note that, for some byte sources, the stream can be resumed after an EOF by reading from it, even after it has returned None. Repeated attempts to do so, without new data available, continue to return None without creating more (closing) frames.

source

pub fn with_capacity(inner: T, codec: U, capacity: usize) -> Framed<T, U>

Provides a Stream and Sink interface for reading and writing to this I/O object, using Decoder and Encoder to read and write the raw data, with a specific read buffer initial capacity.

Raw I/O objects work with byte sequences, but higher-level code usually wants to batch these into meaningful chunks, called “frames”. This method layers framing on top of an I/O object, by using the codec traits to handle encoding and decoding of messages frames. Note that the incoming and outgoing frame types may be distinct.

This function returns a single object that is both Stream and Sink; grouping this into a single object is often useful for layering things like gzip or TLS, which require both read and write access to the underlying object.

If you want to work more directly with the streams and sink, consider calling split on the Framed returned by this method, which will break them into separate objects, allowing them to interact more easily.

source§

impl<T, U> Framed<T, U>

source

pub fn from_parts(parts: FramedParts<T, U>) -> Framed<T, U>

Provides a Stream and Sink interface for reading and writing to this I/O object, using Decoder and Encoder to read and write the raw data.

Raw I/O objects work with byte sequences, but higher-level code usually wants to batch these into meaningful chunks, called “frames”. This method layers framing on top of an I/O object, by using the Codec traits to handle encoding and decoding of messages frames. Note that the incoming and outgoing frame types may be distinct.

This function returns a single object that is both Stream and Sink; grouping this into a single object is often useful for layering things like gzip or TLS, which require both read and write access to the underlying object.

This objects takes a stream and a readbuffer and a writebuffer. These field can be obtained from an existing Framed with the into_parts method.

If you want to work more directly with the streams and sink, consider calling split on the Framed returned by this method, which will break them into separate objects, allowing them to interact more easily.

source

pub fn get_ref(&self) -> &T

Returns a reference to the underlying I/O stream wrapped by Framed.

Note that care should be taken to not tamper with the underlying stream of data coming in as it may corrupt the stream of frames otherwise being worked with.

source

pub fn get_mut(&mut self) -> &mut T

Returns a mutable reference to the underlying I/O stream wrapped by Framed.

Note that care should be taken to not tamper with the underlying stream of data coming in as it may corrupt the stream of frames otherwise being worked with.

source

pub fn get_pin_mut(self: Pin<&mut Self>) -> Pin<&mut T>

Returns a pinned mutable reference to the underlying I/O stream wrapped by Framed.

Note that care should be taken to not tamper with the underlying stream of data coming in as it may corrupt the stream of frames otherwise being worked with.

source

pub fn codec(&self) -> &U

Returns a reference to the underlying codec wrapped by Framed.

Note that care should be taken to not tamper with the underlying codec as it may corrupt the stream of frames otherwise being worked with.

source

pub fn codec_mut(&mut self) -> &mut U

Returns a mutable reference to the underlying codec wrapped by Framed.

Note that care should be taken to not tamper with the underlying codec as it may corrupt the stream of frames otherwise being worked with.

source

pub fn map_codec<C, F>(self, map: F) -> Framed<T, C>where F: FnOnce(U) -> C,

Maps the codec U to C, preserving the read and write buffers wrapped by Framed.

Note that care should be taken to not tamper with the underlying codec as it may corrupt the stream of frames otherwise being worked with.

source

pub fn codec_pin_mut(self: Pin<&mut Self>) -> &mut U

Returns a mutable reference to the underlying codec wrapped by Framed.

Note that care should be taken to not tamper with the underlying codec as it may corrupt the stream of frames otherwise being worked with.

source

pub fn read_buffer(&self) -> &BytesMut

Returns a reference to the read buffer.

source

pub fn read_buffer_mut(&mut self) -> &mut BytesMut

Returns a mutable reference to the read buffer.

source

pub fn write_buffer(&self) -> &BytesMut

Returns a reference to the write buffer.

source

pub fn write_buffer_mut(&mut self) -> &mut BytesMut

Returns a mutable reference to the write buffer.

source

pub fn backpressure_boundary(&self) -> usize

Returns backpressure boundary

source

pub fn set_backpressure_boundary(&mut self, boundary: usize)

Updates backpressure boundary

source

pub fn into_inner(self) -> T

Consumes the Framed, returning its underlying I/O stream.

Note that care should be taken to not tamper with the underlying stream of data coming in as it may corrupt the stream of frames otherwise being worked with.

source

pub fn into_parts(self) -> FramedParts<T, U>

Consumes the Framed, returning its underlying I/O stream, the buffer with unprocessed data, and the codec.

Note that care should be taken to not tamper with the underlying stream of data coming in as it may corrupt the stream of frames otherwise being worked with.

Trait Implementations§

source§

impl<T, U> Debug for Framed<T, U>where T: Debug, U: Debug,

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl<T, I, U> Sink<I> for Framed<T, U>where T: AsyncWrite, U: Encoder<I>, U::Error: From<Error>,

§

type Error = <U as Encoder<I>>::Error

The type of value produced by the sink when an error occurs.
source§

fn poll_ready( self: Pin<&mut Self>, cx: &mut Context<'_> ) -> Poll<Result<(), Self::Error>>

Attempts to prepare the Sink to receive a value. Read more
source§

fn start_send(self: Pin<&mut Self>, item: I) -> Result<(), Self::Error>

Begin the process of sending a value to the sink. Each call to this function must be preceded by a successful call to poll_ready which returned Poll::Ready(Ok(())). Read more
source§

fn poll_flush( self: Pin<&mut Self>, cx: &mut Context<'_> ) -> Poll<Result<(), Self::Error>>

Flush any remaining output from this sink. Read more
source§

fn poll_close( self: Pin<&mut Self>, cx: &mut Context<'_> ) -> Poll<Result<(), Self::Error>>

Flush any remaining output and close this sink, if necessary. Read more
source§

impl<T, U> Stream for Framed<T, U>where T: AsyncRead, U: Decoder,

§

type Item = Result<<U as Decoder>::Item, <U as Decoder>::Error>

Values yielded by the stream.
source§

fn poll_next( self: Pin<&mut Self>, cx: &mut Context<'_> ) -> Poll<Option<Self::Item>>

Attempt to pull out the next value of this stream, registering the current task for wakeup if the value is not yet available, and returning None if the stream is exhausted. Read more
source§

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the stream. Read more
source§

impl<'__pin, T, U> Unpin for Framed<T, U>where __Origin<'__pin, T, U>: Unpin,

Auto Trait Implementations§

§

impl<T, U> RefUnwindSafe for Framed<T, U>where T: RefUnwindSafe, U: RefUnwindSafe,

§

impl<T, U> Send for Framed<T, U>where T: Send, U: Send,

§

impl<T, U> Sync for Framed<T, U>where T: Sync, U: Sync,

§

impl<T, U> UnwindSafe for Framed<T, U>where T: UnwindSafe, U: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<S, T, E> TryStream for Swhere S: Stream<Item = Result<T, E>> + ?Sized,

§

type Ok = T

The type of successful values yielded by this future
§

type Error = E

The type of failures yielded by this future
source§

fn try_poll_next( self: Pin<&mut S>, cx: &mut Context<'_> ) -> Poll<Option<Result<<S as TryStream>::Ok, <S as TryStream>::Error>>>

Poll this TryStream as if it were a Stream. Read more
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more