Struct actix_web::HttpServer

source ·
pub struct HttpServer<F, I, S, B>where
    F: Fn() -> I + Send + Clone + 'static,
    I: IntoServiceFactory<S, Request>,
    S: ServiceFactory<Request, Config = AppConfig>,
    S::Error: Into<Error>,
    S::InitError: Debug,
    S::Response: Into<Response<B>>,
    B: MessageBody,{ /* private fields */ }
Expand description

An HTTP Server.

Create new HTTP server with application factory.

HTTP/2

Currently, HTTP/2 is only supported when using TLS (HTTPS). See bind_rustls or bind_openssl.

Examples

use actix_web::{web, App, HttpResponse, HttpServer};

#[actix_web::main]
async fn main() -> std::io::Result<()> {
    HttpServer::new(|| {
        App::new()
            .service(web::resource("/").to(|| async { "hello world" }))
    })
    .bind(("127.0.0.1", 8080))?
    .run()
    .await
}

Implementations§

source§

impl<F, I, S, B> HttpServer<F, I, S, B>where F: Fn() -> I + Send + Clone + 'static, I: IntoServiceFactory<S, Request>, S: ServiceFactory<Request, Config = AppConfig> + 'static, S::Error: Into<Error> + 'static, S::InitError: Debug, S::Response: Into<Response<B>> + 'static, <S::Service as Service<Request>>::Future: 'static, S::Service: 'static, B: MessageBody + 'static,

source

pub fn new(factory: F) -> Self

Create new HTTP server with application factory

source

pub fn workers(self, num: usize) -> Self

Sets number of workers to start (per bind address).

By default, the number of available physical CPUs is used as the worker count.

source

pub fn keep_alive<T: Into<KeepAlive>>(self, val: T) -> Self

Sets server keep-alive preference.

By default keep-alive is set to 5 seconds.

source

pub fn backlog(self, backlog: u32) -> Self

Sets the maximum number of pending connections.

This refers to the number of clients that can be waiting to be served. Exceeding this number results in the client getting an error when attempting to connect. It should only affect servers under significant load.

Generally set in the 64–2048 range. Default value is 2048.

This method will have no effect if called after a bind().

source

pub fn max_connections(self, num: usize) -> Self

Sets the per-worker maximum number of concurrent connections.

All socket listeners will stop accepting connections when this limit is reached for each worker.

By default max connections is set to a 25k.

source

pub fn max_connection_rate(self, num: usize) -> Self

Sets the per-worker maximum concurrent TLS connection limit.

All listeners will stop accepting connections when this limit is reached. It can be used to limit the global TLS CPU usage.

By default max connections is set to a 256.

source

pub fn worker_max_blocking_threads(self, num: usize) -> Self

Sets max number of threads for each worker’s blocking task thread pool.

One thread pool is set up per worker; not shared across workers.

By default set to 512 divided by the number of workers.

source

pub fn client_request_timeout(self, dur: Duration) -> Self

Sets server client timeout for first request.

Defines a timeout for reading client request head. If a client does not transmit the entire set headers within this time, the request is terminated with a 408 (Request Timeout) error.

To disable timeout set value to 0.

By default client timeout is set to 5000 milliseconds.

source

pub fn client_disconnect_timeout(self, dur: Duration) -> Self

Sets server connection shutdown timeout.

Defines a timeout for connection shutdown. If a shutdown procedure does not complete within this time, the request is dropped.

To disable timeout set value to 0.

By default client timeout is set to 5000 milliseconds.

source

pub fn on_connect<CB>(self, f: CB) -> HttpServer<F, I, S, B>where CB: Fn(&dyn Any, &mut Extensions) + Send + Sync + 'static,

Sets function that will be called once before each connection is handled.

It will receive a &std::any::Any, which contains underlying connection type and an Extensions container so that connection data can be accessed in middleware and handlers.

Connection Types
  • actix_tls::accept::openssl::TlsStream<actix_web::rt::net::TcpStream> when using OpenSSL.
  • actix_tls::accept::rustls::TlsStream<actix_web::rt::net::TcpStream> when using Rustls.
  • actix_web::rt::net::TcpStream when no encryption is used.

See the on_connect example for additional details.

source

pub fn server_hostname<T: AsRef<str>>(self, val: T) -> Self

Sets server host name.

Host name is used by application router as a hostname for url generation. Check ConnectionInfo docs for more info.

By default, hostname is set to “localhost”.

source

pub fn system_exit(self) -> Self

Flags the System to exit after server shutdown.

Does nothing when running under #[tokio::main] runtime.

source

pub fn disable_signals(self) -> Self

Disables signal handling.

source

pub fn shutdown_timeout(self, sec: u64) -> Self

Sets timeout for graceful worker shutdown of workers.

After receiving a stop signal, workers have this much time to finish serving requests. Workers still alive after the timeout are force dropped.

By default shutdown timeout sets to 30 seconds.

source

pub fn addrs(&self) -> Vec<SocketAddr>

Returns addresses of bound sockets.

source

pub fn addrs_with_scheme(&self) -> Vec<(SocketAddr, &str)>

Returns addresses of bound sockets and the scheme for it.

This is useful when the server is bound from different sources with some sockets listening on HTTP and some listening on HTTPS and the user should be presented with an enumeration of which socket requires which protocol.

source

pub fn bind<A: ToSocketAddrs>(self, addrs: A) -> Result<Self>

Resolves socket address(es) and binds server to created listener(s).

Hostname Resolution

When addr includes a hostname, it is possible for this method to bind to both the IPv4 and IPv6 addresses that result from a DNS lookup. You can test this by passing localhost:8080 and noting that the server binds to 127.0.0.1:8080 and [::1]:8080. To bind additional addresses, call this method multiple times.

Note that, if a DNS lookup is required, resolving hostnames is a blocking operation.

Typical Usage

In general, use 127.0.0.1:<port> when testing locally and 0.0.0.0:<port> when deploying (with or without a reverse proxy or load balancer) so that the server is accessible.

Errors

Returns an io::Error if:

  • addrs cannot be resolved into one or more socket addresses;
  • all the resolved socket addresses are already bound.
Example
HttpServer::new(|| App::new())
    .bind(("127.0.0.1", 8080))?
    .bind("[::1]:9000")?
source

pub fn listen(self, lst: TcpListener) -> Result<Self>

Binds to existing listener for accepting incoming connection requests.

No changes are made to lst’s configuration. Ensure it is configured properly before passing ownership to listen().

source

pub fn bind_uds<A>(self, uds_path: A) -> Result<Self>where A: AsRef<Path>,

Opens Unix Domain Socket (UDS) from uds path and binds server to created listener.

source

pub fn listen_uds(self, lst: UnixListener) -> Result<Self>

Binds to existing Unix Domain Socket (UDS) listener.

source§

impl<F, I, S, B> HttpServer<F, I, S, B>where F: Fn() -> I + Send + Clone + 'static, I: IntoServiceFactory<S, Request>, S: ServiceFactory<Request, Config = AppConfig>, S::Error: Into<Error>, S::InitError: Debug, S::Response: Into<Response<B>>, S::Service: 'static, B: MessageBody,

source

pub fn run(self) -> Server

Start listening for incoming connections.

Workers

This method starts a number of HTTP workers in separate threads. The number of workers in a set is defined by workers() or, by default, the number of the machine’s physical cores. One worker set is created for each socket address to be bound. For example, if workers is set to 4, and there are 2 addresses to bind, then 8 worker threads will be spawned.

Panics

This methods panics if no socket addresses were successfully bound or if no Tokio runtime is set up.

Auto Trait Implementations§

§

impl<F, I, S, B> !RefUnwindSafe for HttpServer<F, I, S, B>

§

impl<F, I, S, B> Send for HttpServer<F, I, S, B>where B: Send, S: Send,

§

impl<F, I, S, B> !Sync for HttpServer<F, I, S, B>

§

impl<F, I, S, B> Unpin for HttpServer<F, I, S, B>where B: Unpin, F: Unpin, S: Unpin,

§

impl<F, I, S, B> !UnwindSafe for HttpServer<F, I, S, B>

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> Same<T> for T

§

type Output = T

Should always be Self
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<V, T> VZip<V> for Twhere V: MultiLane<T>,

source§

fn vzip(self) -> V

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more