Type Alias typenum::consts::U2

pub type U2 = UInt<UInt<UTerm, B1>, B0>;

Aliased Type

struct U2 { /* private fields */ }

Implementations

impl<U: Unsigned, B: Bit> UInt<U, B>

pub fn new() -> UInt<U, B>

Instantiates a singleton representing this unsigned integer.

Trait Implementations

impl<U: Unsigned, B: Bit> Add<B0> for UInt<U, B>

U + B0 = U

type Output = UInt<U, B>

The resulting type after applying the + operator.

fn add(self, _: B0) -> Self::Output

Performs the + operation.

impl<U: Unsigned> Add<B1> for UInt<U, B0>

UInt<U, B0> + B1 = UInt<U + B1>

type Output = UInt<U, B1>

The resulting type after applying the + operator.

fn add(self, _: B1) -> Self::Output

Performs the + operation.

impl<Ul, Ur: Unsigned> Add<UInt<Ur, B0>> for UInt<Ul, B0>where Ul: Add<Ur> + Unsigned,

UInt<Ul, B0> + UInt<Ur, B0> = UInt<Ul + Ur, B0>

type Output = UInt<<Ul as Add<Ur>>::Output, B0>

The resulting type after applying the + operator.

fn add(self, rhs: UInt<Ur, B0>) -> Self::Output

Performs the + operation.

impl<Ul, Ur: Unsigned> Add<UInt<Ur, B1>> for UInt<Ul, B0>where Ul: Add<Ur> + Unsigned,

UInt<Ul, B0> + UInt<Ur, B1> = UInt<Ul + Ur, B1>

type Output = UInt<<Ul as Add<Ur>>::Output, B1>

The resulting type after applying the + operator.

fn add(self, rhs: UInt<Ur, B1>) -> Self::Output

Performs the + operation.

impl<U: Unsigned, B: Bit> Add<UTerm> for UInt<U, B>

UInt<U, B> + UTerm = UInt<U, B>

type Output = UInt<U, B>

The resulting type after applying the + operator.

fn add(self, _: UTerm) -> Self::Output

Performs the + operation.

impl<Ul: Unsigned, Bl: Bit, Ur: Unsigned> BitAnd<Ur> for UInt<Ul, Bl>where UInt<Ul, Bl>: PrivateAnd<Ur>, PrivateAndOut<UInt<Ul, Bl>, Ur>: Trim,

Anding unsigned integers. We use our PrivateAnd operator and then Trim the output.

type Output = <<UInt<Ul, Bl> as PrivateAnd<Ur>>::Output as Trim>::Output

The resulting type after applying the & operator.

fn bitand(self, rhs: Ur) -> Self::Output

Performs the & operation.

impl<Ul, Ur: Unsigned> BitOr<UInt<Ur, B0>> for UInt<Ul, B0>where Ul: BitOr<Ur> + Unsigned,

UInt<Ul, B0> | UInt<Ur, B0> = UInt<Ul | Ur, B0>

type Output = UInt<<Ul as BitOr<Ur>>::Output, B0>

The resulting type after applying the | operator.

fn bitor(self, rhs: UInt<Ur, B0>) -> Self::Output

Performs the | operation.

impl<Ul, Ur: Unsigned> BitOr<UInt<Ur, B1>> for UInt<Ul, B0>where Ul: BitOr<Ur> + Unsigned,

UInt<Ul, B0> | UInt<Ur, B1> = UInt<Ul | Ur, B1>

type Output = UInt<<Ul as BitOr<Ur>>::Output, B1>

The resulting type after applying the | operator.

fn bitor(self, rhs: UInt<Ur, B1>) -> Self::Output

Performs the | operation.

impl<B: Bit, U: Unsigned> BitOr<UTerm> for UInt<U, B>

X | UTerm = X

type Output = UInt<U, B>

The resulting type after applying the | operator.

fn bitor(self, _: UTerm) -> Self::Output

Performs the | operation.

impl<Ul: Unsigned, Bl: Bit, Ur: Unsigned> BitXor<Ur> for UInt<Ul, Bl>where UInt<Ul, Bl>: PrivateXor<Ur>, PrivateXorOut<UInt<Ul, Bl>, Ur>: Trim,

Xoring unsigned integers. We use our PrivateXor operator and then Trim the output.

type Output = <<UInt<Ul, Bl> as PrivateXor<Ur>>::Output as Trim>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: Ur) -> Self::Output

Performs the ^ operation.

impl<U: Clone, B: Clone> Clone for UInt<U, B>

fn clone(&self) -> UInt<U, B>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<Ul, Ur: Unsigned> Cmp<UInt<Ur, B0>> for UInt<Ul, B0>where Ul: PrivateCmp<Ur, Equal> + Unsigned,

UInt<Ul, B0> cmp with UInt<Ur, B0>: SoFar is Equal

type Output = <Ul as PrivateCmp<Ur, Equal>>::Output

The result of the comparison. It should only ever be one of Greater, Less, or Equal.

impl<Ul, Ur: Unsigned> Cmp<UInt<Ur, B1>> for UInt<Ul, B0>where Ul: PrivateCmp<Ur, Less> + Unsigned,

UInt<Ul, B0> cmp with UInt<Ur, B1>: SoFar is Less

type Output = <Ul as PrivateCmp<Ur, Less>>::Output

The result of the comparison. It should only ever be one of Greater, Less, or Equal.

impl<U: Unsigned, B: Bit> Cmp<UTerm> for UInt<U, B>

Nonzero > Zero

type Output = Greater

The result of the comparison. It should only ever be one of Greater, Less, or Equal.

impl<U: Debug, B: Debug> Debug for UInt<U, B>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<U: Default, B: Default> Default for UInt<U, B>

fn default() -> UInt<U, B>

Returns the “default value” for a type.

impl<Ul: Unsigned, Bl: Bit, Ur: Unsigned, Br: Bit> Div<UInt<Ur, Br>> for UInt<Ul, Bl>where UInt<Ul, Bl>: Len, Length<UInt<Ul, Bl>>: Sub<B1>, (): PrivateDiv<UInt<Ul, Bl>, UInt<Ur, Br>, U0, U0, Sub1<Length<UInt<Ul, Bl>>>>,

type Output = <() as PrivateDiv<UInt<Ul, Bl>, UInt<Ur, Br>, UTerm, UTerm, <<UInt<Ul, Bl> as Len>::Output as Sub<B1>>::Output>>::Quotient

The resulting type after applying the / operator.

fn div(self, rhs: UInt<Ur, Br>) -> Self::Output

Performs the / operation.

impl<Xp, Yp> Gcd<UInt<Yp, B0>> for UInt<Xp, B0>where Xp: Gcd<Yp>, UInt<Xp, B0>: NonZero, UInt<Yp, B0>: NonZero,

gcd(x, y) = 2*gcd(x/2, y/2) if both x and y even

type Output = UInt<<Xp as Gcd<Yp>>::Output, B0>

The greatest common divisor.

impl<Xp, Yp> Gcd<UInt<Yp, B1>> for UInt<Xp, B0>where Xp: Gcd<UInt<Yp, B1>>, UInt<Xp, B0>: NonZero,

gcd(x, y) = gcd(x/2, y) if x even and y odd

type Output = <Xp as Gcd<UInt<Yp, B1>>>::Output

The greatest common divisor.

impl<Un, Bn, Ui, Bi> GetBit<UInt<Ui, Bi>> for UInt<Un, Bn>where UInt<Ui, Bi>: Copy + Sub<B1>, Un: GetBit<Sub1<UInt<Ui, Bi>>>,

type Output = <Un as GetBit<<UInt<Ui, Bi> as Sub<B1>>::Output>>::Output

impl<Un, Bn> GetBit<UTerm> for UInt<Un, Bn>where Bn: Copy,

type Output = Bn

impl<U: Hash, B: Hash> Hash for UInt<U, B>

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl<U, B: Bit> Len for UInt<U, B>where U: Len + Unsigned, Length<U>: Add<B1>, Add1<Length<U>>: Unsigned,

Length of a bit is 1

type Output = <<U as Len>::Output as Add<B1>>::Output

The length as a type-level unsigned integer.

fn len(&self) -> Self::Output

This function isn’t used in this crate, but may be useful for others.

impl<U, B, Ur> Max<Ur> for UInt<U, B>where U: Unsigned, B: Bit, Ur: Unsigned, UInt<U, B>: Cmp<Ur> + PrivateMax<Ur, Compare<UInt<U, B>, Ur>>,

type Output = <UInt<U, B> as PrivateMax<Ur, <UInt<U, B> as Cmp<Ur>>::Output>>::Output

The type of the maximum of Self and Rhs

fn max(self, rhs: Ur) -> Self::Output

Method returning the maximum

impl<U, B, Ur> Min<Ur> for UInt<U, B>where U: Unsigned, B: Bit, Ur: Unsigned, UInt<U, B>: Cmp<Ur> + PrivateMin<Ur, Compare<UInt<U, B>, Ur>>,

type Output = <UInt<U, B> as PrivateMin<Ur, <UInt<U, B> as Cmp<Ur>>::Output>>::Output

The type of the minimum of Self and Rhs

fn min(self, rhs: Ur) -> Self::Output

Method returning the minimum

impl<U: Unsigned, B: Bit> Mul<B0> for UInt<U, B>

UInt * B0 = UTerm

type Output = UTerm

The resulting type after applying the * operator.

fn mul(self, _: B0) -> Self::Output

Performs the * operation.

impl<U: Unsigned, B: Bit> Mul<B1> for UInt<U, B>

UInt * B1 = UInt

type Output = UInt<U, B>

The resulting type after applying the * operator.

fn mul(self, _: B1) -> Self::Output

Performs the * operation.

impl<Ul, B: Bit, Ur: Unsigned> Mul<UInt<Ur, B>> for UInt<Ul, B0>where Ul: Mul<UInt<Ur, B>> + Unsigned,

UInt<Ul, B0> * UInt<Ur, B> = UInt<(Ul * UInt<Ur, B>), B0>

type Output = UInt<<Ul as Mul<UInt<Ur, B>>>::Output, B0>

The resulting type after applying the * operator.

fn mul(self, rhs: UInt<Ur, B>) -> Self::Output

Performs the * operation.

impl<U: Unsigned, B: Bit> Mul<UTerm> for UInt<U, B>

UInt<U, B> * UTerm = UTerm

type Output = UTerm

The resulting type after applying the * operator.

fn mul(self, _: UTerm) -> Self::Output

Performs the * operation.

impl<U: Ord, B: Ord> Ord for UInt<U, B>

fn cmp(&self, other: &UInt<U, B>) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Selfwhere Self: Sized + PartialOrd<Self>,

Restrict a value to a certain interval.

impl<Ul: Unsigned, Bl: Bit, Ur: Unsigned, Br: Bit> PartialDiv<UInt<Ur, Br>> for UInt<Ul, Bl>where UInt<Ul, Bl>: Div<UInt<Ur, Br>> + Rem<UInt<Ur, Br>, Output = U0>,

type Output = <UInt<Ul, Bl> as Div<UInt<Ur, Br>>>::Output

The type of the result of the division

fn partial_div(self, rhs: UInt<Ur, Br>) -> Self::Output

Method for performing the division

impl<U: PartialEq, B: PartialEq> PartialEq<UInt<U, B>> for UInt<U, B>

fn eq(&self, other: &UInt<U, B>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<U: PartialOrd, B: PartialOrd> PartialOrd<UInt<U, B>> for UInt<U, B>

fn partial_cmp(&self, other: &UInt<U, B>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Ul: Unsigned, Bl: Bit, Ur: Unsigned, Br: Bit> Rem<UInt<Ur, Br>> for UInt<Ul, Bl>where UInt<Ul, Bl>: Len, Length<UInt<Ul, Bl>>: Sub<B1>, (): PrivateDiv<UInt<Ul, Bl>, UInt<Ur, Br>, U0, U0, Sub1<Length<UInt<Ul, Bl>>>>,

type Output = <() as PrivateDiv<UInt<Ul, Bl>, UInt<Ur, Br>, UTerm, UTerm, <<UInt<Ul, Bl> as Len>::Output as Sub<B1>>::Output>>::Remainder

The resulting type after applying the % operator.

fn rem(self, rhs: UInt<Ur, Br>) -> Self::Output

Performs the % operation.

impl<U: Unsigned, B: Bit> Shl<B0> for UInt<U, B>

Shifting left any unsigned by a zero bit: U << B0 = U

type Output = UInt<U, B>

The resulting type after applying the << operator.

fn shl(self, _: B0) -> Self::Output

Performs the << operation.

impl<U: Unsigned, B: Bit> Shl<B1> for UInt<U, B>

Shifting left a UInt by a one bit: UInt<U, B> << B1 = UInt<UInt<U, B>, B0>

type Output = UInt<UInt<U, B>, B0>

The resulting type after applying the << operator.

fn shl(self, _: B1) -> Self::Output

Performs the << operation.

impl<U: Unsigned, B: Bit, Ur: Unsigned, Br: Bit> Shl<UInt<Ur, Br>> for UInt<U, B>where UInt<Ur, Br>: Sub<B1>, UInt<UInt<U, B>, B0>: Shl<Sub1<UInt<Ur, Br>>>,

Shifting left UInt by UInt: X << Y = UInt(X, B0) << (Y - 1)

type Output = <UInt<UInt<U, B>, B0> as Shl<<UInt<Ur, Br> as Sub<B1>>::Output>>::Output

The resulting type after applying the << operator.

fn shl(self, rhs: UInt<Ur, Br>) -> Self::Output

Performs the << operation.

impl<U: Unsigned, B: Bit> Shl<UTerm> for UInt<U, B>

Shifting left UInt by UTerm: UInt<U, B> << UTerm = UInt<U, B>

type Output = UInt<U, B>

The resulting type after applying the << operator.

fn shl(self, _: UTerm) -> Self::Output

Performs the << operation.

impl<U: Unsigned, B: Bit> Shr<B0> for UInt<U, B>

Shifting right any unsigned by a zero bit: U >> B0 = U

type Output = UInt<U, B>

The resulting type after applying the >> operator.

fn shr(self, _: B0) -> Self::Output

Performs the >> operation.

impl<U: Unsigned, B: Bit> Shr<B1> for UInt<U, B>

Shifting right a UInt by a 1 bit: UInt<U, B> >> B1 = U

type Output = U

The resulting type after applying the >> operator.

fn shr(self, _: B1) -> Self::Output

Performs the >> operation.

impl<U, B: Bit, Ur: Unsigned, Br: Bit> Shr<UInt<Ur, Br>> for UInt<U, B>where UInt<Ur, Br>: Sub<B1>, U: Shr<Sub1<UInt<Ur, Br>>> + Unsigned,

Shifting right UInt by UInt: UInt(U, B) >> Y = U >> (Y - 1)

type Output = <U as Shr<<UInt<Ur, Br> as Sub<B1>>::Output>>::Output

The resulting type after applying the >> operator.

fn shr(self, rhs: UInt<Ur, Br>) -> Self::Output

Performs the >> operation.

impl<U: Unsigned, B: Bit> Shr<UTerm> for UInt<U, B>

Shifting right UInt by UTerm: UInt<U, B> >> UTerm = UInt<U, B>

type Output = UInt<U, B>

The resulting type after applying the >> operator.

fn shr(self, _: UTerm) -> Self::Output

Performs the >> operation.

impl<U: Unsigned, B: Bit> Sub<B0> for UInt<U, B>

UInt - B0 = UInt

type Output = UInt<U, B>

The resulting type after applying the - operator.

fn sub(self, _: B0) -> Self::Output

Performs the - operation.

impl<U> Sub<B1> for UInt<U, B0>where U: Sub<B1> + Unsigned, Sub1<U>: Unsigned,

UInt<U, B0> - B1 = UInt<U - B1, B1>

type Output = UInt<<U as Sub<B1>>::Output, B1>

The resulting type after applying the - operator.

fn sub(self, _: B1) -> Self::Output

Performs the - operation.

impl<Ul: Unsigned, Bl: Bit, Ur: Unsigned> Sub<Ur> for UInt<Ul, Bl>where UInt<Ul, Bl>: PrivateSub<Ur>, PrivateSubOut<UInt<Ul, Bl>, Ur>: Trim,

Subtracting unsigned integers. We just do our PrivateSub and then Trim the output.

type Output = <<UInt<Ul, Bl> as PrivateSub<Ur>>::Output as Trim>::Output

The resulting type after applying the - operator.

fn sub(self, rhs: Ur) -> Self::Output

Performs the - operation.

impl<U, B> ToInt<i16> for UInt<U, B>where U: Unsigned, B: Bit,

fn to_int() -> i16

Method returning the concrete value for the type.

const INT: i16 = Self::I16

The concrete value for the type. Can be used in const contexts.

impl<U, B> ToInt<i32> for UInt<U, B>where U: Unsigned, B: Bit,

fn to_int() -> i32

Method returning the concrete value for the type.

const INT: i32 = Self::I32

The concrete value for the type. Can be used in const contexts.

impl<U, B> ToInt<i64> for UInt<U, B>where U: Unsigned, B: Bit,

fn to_int() -> i64

Method returning the concrete value for the type.

const INT: i64 = Self::I64

The concrete value for the type. Can be used in const contexts.

impl<U, B> ToInt<i8> for UInt<U, B>where U: Unsigned, B: Bit,

fn to_int() -> i8

Method returning the concrete value for the type.

const INT: i8 = Self::I8

The concrete value for the type. Can be used in const contexts.

impl<U, B> ToInt<u16> for UInt<U, B>where U: Unsigned, B: Bit,

fn to_int() -> u16

Method returning the concrete value for the type.

const INT: u16 = Self::U16

The concrete value for the type. Can be used in const contexts.

impl<U, B> ToInt<u32> for UInt<U, B>where U: Unsigned, B: Bit,

fn to_int() -> u32

Method returning the concrete value for the type.

const INT: u32 = Self::U32

The concrete value for the type. Can be used in const contexts.

impl<U, B> ToInt<u64> for UInt<U, B>where U: Unsigned, B: Bit,

fn to_int() -> u64

Method returning the concrete value for the type.

const INT: u64 = Self::U64

The concrete value for the type. Can be used in const contexts.

impl<U, B> ToInt<u8> for UInt<U, B>where U: Unsigned, B: Bit,

fn to_int() -> u8

Method returning the concrete value for the type.

const INT: u8 = Self::U8

The concrete value for the type. Can be used in const contexts.

impl<U, B> ToInt<usize> for UInt<U, B>where U: Unsigned, B: Bit,

fn to_int() -> usize

Method returning the concrete value for the type.

const INT: usize = Self::USIZE

The concrete value for the type. Can be used in const contexts.

impl<U: Unsigned, B: Bit> Unsigned for UInt<U, B>

const U8: u8 = _

const U16: u16 = _

const U32: u32 = _

const U64: u64 = _

const USIZE: usize = _

const I8: i8 = _

const I16: i16 = _

const I32: i32 = _

const I64: i64 = _

const ISIZE: isize = _

fn to_u8() -> u8

fn to_u16() -> u16

fn to_u32() -> u32

fn to_u64() -> u64

fn to_usize() -> usize

fn to_i8() -> i8

fn to_i16() -> i16

fn to_i32() -> i32

fn to_i64() -> i64

fn to_isize() -> isize

impl<U: Copy, B: Copy> Copy for UInt<U, B>

impl<U: Eq, B: Eq> Eq for UInt<U, B>

impl<U: Unsigned, B: Bit> NonZero for UInt<U, B>

impl<U: Unsigned + PowerOfTwo> PowerOfTwo for UInt<U, B0>

impl<U, B> StructuralEq for UInt<U, B>

impl<U, B> StructuralPartialEq for UInt<U, B>