Struct openssl::ssl::SslMode

#[repr(transparent)]
pub struct SslMode(/* private fields */);

Options controlling the behavior of an SslContext.

Implementations

impl SslMode

pub const ENABLE_PARTIAL_WRITE: Self = _

Enables “short writes”.

Normally, a write in OpenSSL will always write out all of the requested data, even if it requires more than one TLS record or write to the underlying stream. This option will cause a write to return after writing a single TLS record instead.

pub const ACCEPT_MOVING_WRITE_BUFFER: Self = _

Disables a check that the data buffer has not moved between calls when operating in a non-blocking context.

pub const AUTO_RETRY: Self = _

Enables automatic retries after TLS session events such as renegotiations or heartbeats.

By default, OpenSSL will return a WantRead error after a renegotiation or heartbeat. This option will cause OpenSSL to automatically continue processing the requested operation instead.

Note that SslStream::read and SslStream::write will automatically retry regardless of the state of this option. It only affects SslStream::ssl_read and SslStream::ssl_write.

pub const NO_AUTO_CHAIN: Self = _

Disables automatic chain building when verifying a peer’s certificate.

TLS peers are responsible for sending the entire certificate chain from the leaf to a trusted root, but some will incorrectly not do so. OpenSSL will try to build the chain out of certificates it knows of, and this option will disable that behavior.

pub const RELEASE_BUFFERS: Self = _

Release memory buffers when the session does not need them.

This saves ~34 KiB of memory for idle streams.

pub const SEND_FALLBACK_SCSV: Self = _

Sends the fake TLS_FALLBACK_SCSV cipher suite in the ClientHello message of a handshake.

This should only be enabled if a client has failed to connect to a server which attempted to downgrade the protocol version of the session.

Do not use this unless you know what you’re doing!

impl SslMode

pub const fn empty() -> Self

Get a flags value with all bits unset.

pub const fn all() -> Self

Get a flags value with all known bits set.

pub const fn bits(&self) -> c_long

Get the underlying bits value.

The returned value is exactly the bits set in this flags value.

pub const fn from_bits(bits: c_long) -> Option<Self>

Convert from a bits value.

This method will return None if any unknown bits are set.

pub const fn from_bits_truncate(bits: c_long) -> Self

Convert from a bits value, unsetting any unknown bits.

pub const fn from_bits_retain(bits: c_long) -> Self

Convert from a bits value exactly.

pub fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

This method will return None if name is empty or doesn’t correspond to any named flag.

pub const fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

pub const fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

pub const fn intersects(&self, other: Self) -> bool

Whether any set bits in a source flags value are also set in a target flags value.

pub const fn contains(&self, other: Self) -> bool

Whether all set bits in a source flags value are also set in a target flags value.

pub fn insert(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

pub fn remove(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. remove won’t truncate other, but the ! operator will.

pub fn toggle(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

pub fn set(&mut self, other: Self, value: bool)

Call insert when value is true or remove when value is false.

pub const fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

pub const fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

pub const fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

pub const fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

pub const fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl SslMode

pub const fn iter(&self) -> Iter<SslMode>

Yield a set of contained flags values.

Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.

pub const fn iter_names(&self) -> IterNames<SslMode>

Yield a set of contained named flags values.

This method is like iter, except only yields bits in contained named flags. Any unknown bits, or bits not corresponding to a contained flag will not be yielded.

Trait Implementations

impl Binary for SslMode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd<SslMode> for SslMode

fn bitand(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

type Output = SslMode

The resulting type after applying the & operator.

impl BitAndAssign<SslMode> for SslMode

fn bitand_assign(&mut self, other: Self)

The bitwise and (&) of the bits in two flags values.

impl BitOr<SslMode> for SslMode

fn bitor(self, other: SslMode) -> Self

The bitwise or (|) of the bits in two flags values.

type Output = SslMode

The resulting type after applying the | operator.

impl BitOrAssign<SslMode> for SslMode

fn bitor_assign(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

impl BitXor<SslMode> for SslMode

fn bitxor(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

type Output = SslMode

The resulting type after applying the ^ operator.

impl BitXorAssign<SslMode> for SslMode

fn bitxor_assign(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

impl Clone for SslMode

fn clone(&self) -> SslMode

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SslMode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<SslMode> for SslMode

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

The bitwise or (|) of the bits in each flags value.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl Flags for SslMode

const FLAGS: &'static [Flag<SslMode>] = _

The set of defined flags.

type Bits = i64

The underlying bits type.

fn bits(&self) -> c_long

Get the underlying bits value.

fn from_bits_retain(bits: c_long) -> SslMode

Convert from a bits value exactly.

fn empty() -> Self

Get a flags value with all bits unset.

fn all() -> Self

Get a flags value with all known bits set.

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from a bits value.

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from a bits value, unsetting any unknown bits.

fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

fn iter(&self) -> Iter<Self>

Yield a set of contained flags values.

fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values.

fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

fn intersects(&self, other: Self) -> boolwhere Self: Sized,

Whether any set bits in a source flags value are also set in a target flags value.

fn contains(&self, other: Self) -> boolwhere Self: Sized,

Whether all set bits in a source flags value are also set in a target flags value.

fn insert(&mut self, other: Self)where Self: Sized,

The bitwise or (|) of the bits in two flags values.

fn remove(&mut self, other: Self)where Self: Sized,

The intersection of a source flags value with the complement of a target flags value (&!).

fn toggle(&mut self, other: Self)where Self: Sized,

The bitwise exclusive-or (^) of the bits in two flags values.

fn set(&mut self, other: Self, value: bool)where Self: Sized,

Call Flags::insert when value is true or Flags::remove when value is false.

fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl FromIterator<SslMode> for SslMode

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

The bitwise or (|) of the bits in each flags value.

impl Hash for SslMode

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl IntoIterator for SslMode

type Item = SslMode

The type of the elements being iterated over.

type IntoIter = Iter<SslMode>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl LowerHex for SslMode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for SslMode

fn not(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

type Output = SslMode

The resulting type after applying the ! operator.

impl Octal for SslMode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for SslMode

fn cmp(&self, other: &SslMode) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Selfwhere Self: Sized + PartialOrd<Self>,

Restrict a value to a certain interval.

impl PartialEq<SslMode> for SslMode

fn eq(&self, other: &SslMode) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd<SslMode> for SslMode

fn partial_cmp(&self, other: &SslMode) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PublicFlags for SslMode

type Primitive = i64

The type of the underlying storage.

type Internal = InternalBitFlags

The type of the internal field on the generated flags type.

impl Sub<SslMode> for SslMode

fn sub(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

type Output = SslMode

The resulting type after applying the - operator.

impl SubAssign<SslMode> for SslMode

fn sub_assign(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

impl UpperHex for SslMode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for SslMode

impl Eq for SslMode

impl StructuralEq for SslMode

impl StructuralPartialEq for SslMode