Struct futures::prelude::stream::ReadyChunks

source ·
pub struct ReadyChunks<St>
where St: Stream,
{ /* private fields */ }
Expand description

Stream for the ready_chunks method.

Implementations§

source§

impl<St> ReadyChunks<St>
where St: Stream,

source

pub fn get_ref(&self) -> &St

Acquires a reference to the underlying sink or stream that this combinator is pulling from.

source

pub fn get_mut(&mut self) -> &mut St

Acquires a mutable reference to the underlying sink or stream that this combinator is pulling from.

Note that care must be taken to avoid tampering with the state of the sink or stream which may otherwise confuse this combinator.

source

pub fn get_pin_mut(self: Pin<&mut ReadyChunks<St>>) -> Pin<&mut St>

Acquires a pinned mutable reference to the underlying sink or stream that this combinator is pulling from.

Note that care must be taken to avoid tampering with the state of the sink or stream which may otherwise confuse this combinator.

source

pub fn into_inner(self) -> St

Consumes this combinator, returning the underlying sink or stream.

Note that this may discard intermediate state of this combinator, so care should be taken to avoid losing resources when this is called.

Trait Implementations§

source§

impl<St> Debug for ReadyChunks<St>
where St: Debug + Stream,

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
source§

impl<St> FusedStream for ReadyChunks<St>
where St: Stream,

source§

fn is_terminated(&self) -> bool

Returns true if the stream should no longer be polled.
source§

impl<S, Item> Sink<Item> for ReadyChunks<S>
where S: Stream + Sink<Item>,

§

type Error = <S as Sink<Item>>::Error

The type of value produced by the sink when an error occurs.
source§

fn poll_ready( self: Pin<&mut ReadyChunks<S>>, cx: &mut Context<'_>, ) -> Poll<Result<(), <ReadyChunks<S> as Sink<Item>>::Error>>

Attempts to prepare the Sink to receive a value. Read more
source§

fn start_send( self: Pin<&mut ReadyChunks<S>>, item: Item, ) -> Result<(), <ReadyChunks<S> as Sink<Item>>::Error>

Begin the process of sending a value to the sink. Each call to this function must be preceded by a successful call to poll_ready which returned Poll::Ready(Ok(())). Read more
source§

fn poll_flush( self: Pin<&mut ReadyChunks<S>>, cx: &mut Context<'_>, ) -> Poll<Result<(), <ReadyChunks<S> as Sink<Item>>::Error>>

Flush any remaining output from this sink. Read more
source§

fn poll_close( self: Pin<&mut ReadyChunks<S>>, cx: &mut Context<'_>, ) -> Poll<Result<(), <ReadyChunks<S> as Sink<Item>>::Error>>

Flush any remaining output and close this sink, if necessary. Read more
source§

impl<St> Stream for ReadyChunks<St>
where St: Stream,

§

type Item = Vec<<St as Stream>::Item>

Values yielded by the stream.
source§

fn poll_next( self: Pin<&mut ReadyChunks<St>>, cx: &mut Context<'_>, ) -> Poll<Option<<ReadyChunks<St> as Stream>::Item>>

Attempt to pull out the next value of this stream, registering the current task for wakeup if the value is not yet available, and returning None if the stream is exhausted. Read more
source§

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the stream. Read more
source§

impl<'__pin, St> Unpin for ReadyChunks<St>
where St: Stream, __Origin<'__pin, St>: Unpin,

Auto Trait Implementations§

§

impl<St> Freeze for ReadyChunks<St>
where St: Freeze,

§

impl<St> RefUnwindSafe for ReadyChunks<St>
where St: RefUnwindSafe,

§

impl<St> Send for ReadyChunks<St>
where St: Send,

§

impl<St> Sync for ReadyChunks<St>
where St: Sync,

§

impl<St> UnwindSafe for ReadyChunks<St>
where St: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, Item> SinkExt<Item> for T
where T: Sink<Item> + ?Sized,

source§

fn with<U, Fut, F, E>(self, f: F) -> With<Self, Item, U, Fut, F>
where F: FnMut(U) -> Fut, Fut: Future<Output = Result<Item, E>>, E: From<Self::Error>, Self: Sized,

Composes a function in front of the sink. Read more
source§

fn with_flat_map<U, St, F>(self, f: F) -> WithFlatMap<Self, Item, U, St, F>
where F: FnMut(U) -> St, St: Stream<Item = Result<Item, Self::Error>>, Self: Sized,

Composes a function in front of the sink. Read more
source§

fn sink_map_err<E, F>(self, f: F) -> SinkMapErr<Self, F>
where F: FnOnce(Self::Error) -> E, Self: Sized,

Transforms the error returned by the sink.
source§

fn sink_err_into<E>(self) -> SinkErrInto<Self, Item, E>
where Self: Sized, Self::Error: Into<E>,

Map this sink’s error to a different error type using the Into trait. Read more
source§

fn buffer(self, capacity: usize) -> Buffer<Self, Item>
where Self: Sized,

Adds a fixed-size buffer to the current sink. Read more
source§

fn close(&mut self) -> Close<'_, Self, Item>
where Self: Unpin,

Close the sink.
source§

fn fanout<Si>(self, other: Si) -> Fanout<Self, Si>
where Self: Sized, Item: Clone, Si: Sink<Item, Error = Self::Error>,

Fanout items to multiple sinks. Read more
source§

fn flush(&mut self) -> Flush<'_, Self, Item>
where Self: Unpin,

Flush the sink, processing all pending items. Read more
source§

fn send(&mut self, item: Item) -> Send<'_, Self, Item>
where Self: Unpin,

A future that completes after the given item has been fully processed into the sink, including flushing. Read more
source§

fn feed(&mut self, item: Item) -> Feed<'_, Self, Item>
where Self: Unpin,

A future that completes after the given item has been received by the sink. Read more
source§

fn send_all<'a, St>(&'a mut self, stream: &'a mut St) -> SendAll<'a, Self, St>
where St: TryStream<Ok = Item, Error = Self::Error> + Stream + Unpin + ?Sized, Self: Unpin,

A future that completes after the given stream has been fully processed into the sink, including flushing. Read more
source§

fn left_sink<Si2>(self) -> Either<Self, Si2>
where Si2: Sink<Item, Error = Self::Error>, Self: Sized,

Wrap this sink in an Either sink, making it the left-hand variant of that Either. Read more
source§

fn right_sink<Si1>(self) -> Either<Si1, Self>
where Si1: Sink<Item, Error = Self::Error>, Self: Sized,

Wrap this stream in an Either stream, making it the right-hand variant of that Either. Read more
source§

fn poll_ready_unpin( &mut self, cx: &mut Context<'_>, ) -> Poll<Result<(), Self::Error>>
where Self: Unpin,

A convenience method for calling Sink::poll_ready on Unpin sink types.
source§

fn start_send_unpin(&mut self, item: Item) -> Result<(), Self::Error>
where Self: Unpin,

A convenience method for calling Sink::start_send on Unpin sink types.
source§

fn poll_flush_unpin( &mut self, cx: &mut Context<'_>, ) -> Poll<Result<(), Self::Error>>
where Self: Unpin,

A convenience method for calling Sink::poll_flush on Unpin sink types.
source§

fn poll_close_unpin( &mut self, cx: &mut Context<'_>, ) -> Poll<Result<(), Self::Error>>
where Self: Unpin,

A convenience method for calling Sink::poll_close on Unpin sink types.
source§

impl<T> StreamExt for T
where T: Stream + ?Sized,

source§

fn next(&mut self) -> Next<'_, Self>
where Self: Unpin,

Creates a future that resolves to the next item in the stream. Read more
source§

fn into_future(self) -> StreamFuture<Self>
where Self: Sized + Unpin,

Converts this stream into a future of (next_item, tail_of_stream). If the stream terminates, then the next item is None. Read more
source§

fn map<T, F>(self, f: F) -> Map<Self, F>
where F: FnMut(Self::Item) -> T, Self: Sized,

Maps this stream’s items to a different type, returning a new stream of the resulting type. Read more
source§

fn enumerate(self) -> Enumerate<Self>
where Self: Sized,

Creates a stream which gives the current iteration count as well as the next value. Read more
source§

fn filter<Fut, F>(self, f: F) -> Filter<Self, Fut, F>
where F: FnMut(&Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Filters the values produced by this stream according to the provided asynchronous predicate. Read more
source§

fn filter_map<Fut, T, F>(self, f: F) -> FilterMap<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = Option<T>>, Self: Sized,

Filters the values produced by this stream while simultaneously mapping them to a different type according to the provided asynchronous closure. Read more
source§

fn then<Fut, F>(self, f: F) -> Then<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future, Self: Sized,

Computes from this stream’s items new items of a different type using an asynchronous closure. Read more
source§

fn collect<C>(self) -> Collect<Self, C>
where C: Default + Extend<Self::Item>, Self: Sized,

Transforms a stream into a collection, returning a future representing the result of that computation. Read more
source§

fn unzip<A, B, FromA, FromB>(self) -> Unzip<Self, FromA, FromB>
where FromA: Default + Extend<A>, FromB: Default + Extend<B>, Self: Sized + Stream<Item = (A, B)>,

Converts a stream of pairs into a future, which resolves to pair of containers. Read more
source§

fn concat(self) -> Concat<Self>
where Self: Sized, Self::Item: Extend<<Self::Item as IntoIterator>::Item> + IntoIterator + Default,

Concatenate all items of a stream into a single extendable destination, returning a future representing the end result. Read more
source§

fn count(self) -> Count<Self>
where Self: Sized,

Drives the stream to completion, counting the number of items. Read more
source§

fn cycle(self) -> Cycle<Self>
where Self: Sized + Clone,

Repeats a stream endlessly. Read more
source§

fn fold<T, Fut, F>(self, init: T, f: F) -> Fold<Self, Fut, T, F>
where F: FnMut(T, Self::Item) -> Fut, Fut: Future<Output = T>, Self: Sized,

Execute an accumulating asynchronous computation over a stream, collecting all the values into one final result. Read more
source§

fn any<Fut, F>(self, f: F) -> Any<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Execute predicate over asynchronous stream, and return true if any element in stream satisfied a predicate. Read more
source§

fn all<Fut, F>(self, f: F) -> All<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Execute predicate over asynchronous stream, and return true if all element in stream satisfied a predicate. Read more
source§

fn flatten(self) -> Flatten<Self>
where Self::Item: Stream, Self: Sized,

Flattens a stream of streams into just one continuous stream. Read more
source§

fn flatten_unordered( self, limit: impl Into<Option<usize>>, ) -> FlattenUnorderedWithFlowController<Self, ()>
where Self::Item: Stream + Unpin, Self: Sized,

Flattens a stream of streams into just one continuous stream. Polls inner streams produced by the base stream concurrently. Read more
source§

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F>
where F: FnMut(Self::Item) -> U, U: Stream, Self: Sized,

Maps a stream like StreamExt::map but flattens nested Streams. Read more
source§

fn flat_map_unordered<U, F>( self, limit: impl Into<Option<usize>>, f: F, ) -> FlatMapUnordered<Self, U, F>
where U: Stream + Unpin, F: FnMut(Self::Item) -> U, Self: Sized,

Maps a stream like StreamExt::map but flattens nested Streams and polls them concurrently, yielding items in any order, as they made available. Read more
source§

fn scan<S, B, Fut, F>(self, initial_state: S, f: F) -> Scan<Self, S, Fut, F>
where F: FnMut(&mut S, Self::Item) -> Fut, Fut: Future<Output = Option<B>>, Self: Sized,

Combinator similar to StreamExt::fold that holds internal state and produces a new stream. Read more
source§

fn skip_while<Fut, F>(self, f: F) -> SkipWhile<Self, Fut, F>
where F: FnMut(&Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Skip elements on this stream while the provided asynchronous predicate resolves to true. Read more
source§

fn take_while<Fut, F>(self, f: F) -> TakeWhile<Self, Fut, F>
where F: FnMut(&Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Take elements from this stream while the provided asynchronous predicate resolves to true. Read more
source§

fn take_until<Fut>(self, fut: Fut) -> TakeUntil<Self, Fut>
where Fut: Future, Self: Sized,

Take elements from this stream until the provided future resolves. Read more
source§

fn for_each<Fut, F>(self, f: F) -> ForEach<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = ()>, Self: Sized,

Runs this stream to completion, executing the provided asynchronous closure for each element on the stream. Read more
source§

fn for_each_concurrent<Fut, F>( self, limit: impl Into<Option<usize>>, f: F, ) -> ForEachConcurrent<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = ()>, Self: Sized,

Runs this stream to completion, executing the provided asynchronous closure for each element on the stream concurrently as elements become available. Read more
source§

fn take(self, n: usize) -> Take<Self>
where Self: Sized,

Creates a new stream of at most n items of the underlying stream. Read more
source§

fn skip(self, n: usize) -> Skip<Self>
where Self: Sized,

Creates a new stream which skips n items of the underlying stream. Read more
source§

fn fuse(self) -> Fuse<Self>
where Self: Sized,

Fuse a stream such that poll_next will never again be called once it has finished. This method can be used to turn any Stream into a FusedStream. Read more
source§

fn by_ref(&mut self) -> &mut Self

Borrows a stream, rather than consuming it. Read more
source§

fn catch_unwind(self) -> CatchUnwind<Self>
where Self: Sized + UnwindSafe,

Catches unwinding panics while polling the stream. Read more
source§

fn boxed<'a>(self) -> Pin<Box<dyn Stream<Item = Self::Item> + Send + 'a>>
where Self: Sized + Send + 'a,

Wrap the stream in a Box, pinning it. Read more
source§

fn boxed_local<'a>(self) -> Pin<Box<dyn Stream<Item = Self::Item> + 'a>>
where Self: Sized + 'a,

Wrap the stream in a Box, pinning it. Read more
source§

fn buffered(self, n: usize) -> Buffered<Self>
where Self::Item: Future, Self: Sized,

An adaptor for creating a buffered list of pending futures. Read more
source§

fn buffer_unordered(self, n: usize) -> BufferUnordered<Self>
where Self::Item: Future, Self: Sized,

An adaptor for creating a buffered list of pending futures (unordered). Read more
source§

fn zip<St>(self, other: St) -> Zip<Self, St>
where St: Stream, Self: Sized,

An adapter for zipping two streams together. Read more
source§

fn chain<St>(self, other: St) -> Chain<Self, St>
where St: Stream<Item = Self::Item>, Self: Sized,

Adapter for chaining two streams. Read more
source§

fn peekable(self) -> Peekable<Self>
where Self: Sized,

Creates a new stream which exposes a peek method. Read more
source§

fn chunks(self, capacity: usize) -> Chunks<Self>
where Self: Sized,

An adaptor for chunking up items of the stream inside a vector. Read more
source§

fn ready_chunks(self, capacity: usize) -> ReadyChunks<Self>
where Self: Sized,

An adaptor for chunking up ready items of the stream inside a vector. Read more
source§

fn forward<S>(self, sink: S) -> Forward<Self, S>
where S: Sink<Self::Ok, Error = Self::Error>, Self: Sized + TryStream,

A future that completes after the given stream has been fully processed into the sink and the sink has been flushed and closed. Read more
source§

fn split<Item>(self) -> (SplitSink<Self, Item>, SplitStream<Self>)
where Self: Sized + Sink<Item>,

Splits this Stream + Sink object into separate Sink and Stream objects. Read more
source§

fn inspect<F>(self, f: F) -> Inspect<Self, F>
where F: FnMut(&Self::Item), Self: Sized,

Do something with each item of this stream, afterwards passing it on. Read more
source§

fn left_stream<B>(self) -> Either<Self, B>
where B: Stream<Item = Self::Item>, Self: Sized,

Wrap this stream in an Either stream, making it the left-hand variant of that Either. Read more
source§

fn right_stream<B>(self) -> Either<B, Self>
where B: Stream<Item = Self::Item>, Self: Sized,

Wrap this stream in an Either stream, making it the right-hand variant of that Either. Read more
source§

fn poll_next_unpin(&mut self, cx: &mut Context<'_>) -> Poll<Option<Self::Item>>
where Self: Unpin,

A convenience method for calling Stream::poll_next on Unpin stream types.
source§

fn select_next_some(&mut self) -> SelectNextSome<'_, Self>
where Self: Unpin + FusedStream,

Returns a Future that resolves when the next item in this stream is ready. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.